Image 1 of 1
EVAC AND RECHARGE R-134A OLDER VECHICLES
EVAC AND RECHARGE R-134A
Service overview
Complete evacuation of existing R-134A refrigerant and system contaminants
Vacuum leak test to verify system integrity
Recharge with manufacturer-specified amount of R-134A refrigerant
Performance verification: system pressures, temperatures, and cabin cooling performance
Replace or inspect service port O-rings and recommended small components as needed
Refrigerant recovery and disposal in accordance with regulations
What’s included
Certified recovery and evacuation using approved equipment
Nitrogen or deep vacuum evacuation to remove moisture and non-condensables
Accurate electronic charging to the specified refrigerant weight
Refrigerant leak dye (optional) and detection if requested
Final diagnostic readout and test drive to confirm proper operation
Typical benefits
Restores proper cooling performance and system efficiency
Prevents compressor damage caused by moisture or incorrect refrigerant levels
Ensures compliance with environmental and safety regulations
Extends life of A/C components and improves passenger comfort
Time & pricing (estimate)
Typical job time: 60–90 minutes (varies by vehicle and system condition)
Pricing depends on refrigerant amount, any required parts, and labor — quote provided after vehicle inspection
When to choose this service
Weak or warm A/C airflow
Intermittent cooling or poor temperature control
After A/C component replacement (compressor, condenser, receiver/dryer or accumulator)
Following a confirmed refrigerant leak repair
Important notes
Some vehicles use alternate refrigerants or require specific procedures — we will confirm vehicle compatibility prior to service
If leak repair or major component replacement is needed, additional parts and labor will be quoted
R-134A handling performed by EPA-certified technicians
Schedule or get a quote
Provide vehicle make, model, year, and description of A/C symptoms, and we’ll prepare an estimate and appointment availability
HARR
EVAC AND RECHARGE R-134A
Service overview
Complete evacuation of existing R-134A refrigerant and system contaminants
Vacuum leak test to verify system integrity
Recharge with manufacturer-specified amount of R-134A refrigerant
Performance verification: system pressures, temperatures, and cabin cooling performance
Replace or inspect service port O-rings and recommended small components as needed
Refrigerant recovery and disposal in accordance with regulations
What’s included
Certified recovery and evacuation using approved equipment
Nitrogen or deep vacuum evacuation to remove moisture and non-condensables
Accurate electronic charging to the specified refrigerant weight
Refrigerant leak dye (optional) and detection if requested
Final diagnostic readout and test drive to confirm proper operation
Typical benefits
Restores proper cooling performance and system efficiency
Prevents compressor damage caused by moisture or incorrect refrigerant levels
Ensures compliance with environmental and safety regulations
Extends life of A/C components and improves passenger comfort
Time & pricing (estimate)
Typical job time: 60–90 minutes (varies by vehicle and system condition)
Pricing depends on refrigerant amount, any required parts, and labor — quote provided after vehicle inspection
When to choose this service
Weak or warm A/C airflow
Intermittent cooling or poor temperature control
After A/C component replacement (compressor, condenser, receiver/dryer or accumulator)
Following a confirmed refrigerant leak repair
Important notes
Some vehicles use alternate refrigerants or require specific procedures — we will confirm vehicle compatibility prior to service
If leak repair or major component replacement is needed, additional parts and labor will be quoted
R-134A handling performed by EPA-certified technicians
Schedule or get a quote
Provide vehicle make, model, year, and description of A/C symptoms, and we’ll prepare an estimate and appointment availability
HARRISON MVAC SERVICE AND REPAIRS LLC — Service • Repair • Replace in Automotive
EVAC AND RECHARGE R-134A
Service overview
Complete evacuation of existing R-134A refrigerant and system contaminants
Vacuum leak test to verify system integrity
Recharge with manufacturer-specified amount of R-134A refrigerant
Performance verification: system pressures, temperatures, and cabin cooling performance
Replace or inspect service port O-rings and recommended small components as needed
Refrigerant recovery and disposal in accordance with regulations
What’s included
Certified recovery and evacuation using approved equipment
Nitrogen or deep vacuum evacuation to remove moisture and non-condensables
Accurate electronic charging to the specified refrigerant weight
Refrigerant leak dye (optional) and detection if requested
Final diagnostic readout and test drive to confirm proper operation
Typical benefits
Restores proper cooling performance and system efficiency
Prevents compressor damage caused by moisture or incorrect refrigerant levels
Ensures compliance with environmental and safety regulations
Extends life of A/C components and improves passenger comfort
Time & pricing (estimate)
Typical job time: 60–90 minutes (varies by vehicle and system condition)
Pricing depends on refrigerant amount, any required parts, and labor — quote provided after vehicle inspection
When to choose this service
Weak or warm A/C airflow
Intermittent cooling or poor temperature control
After A/C component replacement (compressor, condenser, receiver/dryer or accumulator)
Following a confirmed refrigerant leak repair
Important notes
Some vehicles use alternate refrigerants or require specific procedures — we will confirm vehicle compatibility prior to service
If leak repair or major component replacement is needed, additional parts and labor will be quoted
R-134A handling performed by EPA-certified technicians
Schedule or get a quote
Provide vehicle make, model, year, and description of A/C symptoms, and we’ll prepare an estimate and appointment availability
HARR
EVAC AND RECHARGE R-134A
Service overview
Complete evacuation of existing R-134A refrigerant and system contaminants
Vacuum leak test to verify system integrity
Recharge with manufacturer-specified amount of R-134A refrigerant
Performance verification: system pressures, temperatures, and cabin cooling performance
Replace or inspect service port O-rings and recommended small components as needed
Refrigerant recovery and disposal in accordance with regulations
What’s included
Certified recovery and evacuation using approved equipment
Nitrogen or deep vacuum evacuation to remove moisture and non-condensables
Accurate electronic charging to the specified refrigerant weight
Refrigerant leak dye (optional) and detection if requested
Final diagnostic readout and test drive to confirm proper operation
Typical benefits
Restores proper cooling performance and system efficiency
Prevents compressor damage caused by moisture or incorrect refrigerant levels
Ensures compliance with environmental and safety regulations
Extends life of A/C components and improves passenger comfort
Time & pricing (estimate)
Typical job time: 60–90 minutes (varies by vehicle and system condition)
Pricing depends on refrigerant amount, any required parts, and labor — quote provided after vehicle inspection
When to choose this service
Weak or warm A/C airflow
Intermittent cooling or poor temperature control
After A/C component replacement (compressor, condenser, receiver/dryer or accumulator)
Following a confirmed refrigerant leak repair
Important notes
Some vehicles use alternate refrigerants or require specific procedures — we will confirm vehicle compatibility prior to service
If leak repair or major component replacement is needed, additional parts and labor will be quoted
R-134A handling performed by EPA-certified technicians
Schedule or get a quote
Provide vehicle make, model, year, and description of A/C symptoms, and we’ll prepare an estimate and appointment availability
HARRISON MVAC SERVICE AND REPAIRS LLC — Service • Repair • Replace in Automotive

